Removing The Bracket - Xerox WorkCentre 5222 Service Manual

3. Open the L/H Upper Cover.
4. Disconnect the belt and connector.
a. Remove the flange (item 1).
Remove the belt (item 2).
Disconnect (item 3).
Disconnect (item 4).
Figure 3 Disconnecting the belt and connector (j0st40101)
Repairs and Adjustments
REP 1.1.1
(Figure 3)
5. Remove the bracket. (Figure
2
Remove the screws (2)
6. Remove the Main Drive Assembly.
a. Open Left Cover Assembly (not shown).
b. Remove the screws (x4).
c. Remove the Main Drive Assembly.
February, 2008
4-4
4)
3
1
Remove the Bracket
Disconnect the wire clamp
from the bracket
Figure 4 Removing the bracket
(Figure 5)
WorkCentre 5225, 5230
Launch Version