073-211 Tray 3 Broken Rap; 071-940 Tray 3 Lift Up Rap - Xerox WorkCentre 5222 Service Manual

073-211 Tray 3 Broken RAP

BSD-ON:7.3/7.5
The Tray 3 Paper Size Switch failed.
Initial Actions
• Reload the tray correctly.
• Check the operation of the tray actuator.
• Power OFF/ON
Procedure
[For 2TM]
Remove Trays 3 and 4. Replace Tray 3 with Tray 4. [073-211] occurs.
Y N
Replace the faulty part of the Tray 3 Actuator.
Check the installation of the Tray 3 Paper Size Switch. The Tray 3 Paper Size Switch is
installed correctly.
Y N
Install the Tray 3 Paper Size Switch correctly.
Go to the OF 2 (SIZE SWITCH ASSY RAP).
[For TTM]
Check the Tray 3 Actuator. The Tray 3 Actuator is not distorted.
Y N
Install the Tray 3 Paper Size Switch correctly.
Check the installation of the Tray 3 Paper Size Switch. The Tray 3 Paper Size Switch is
installed correctly.
Y N
Install the Tray 3 Paper Size Switch correctly.
Go to the OF 2 (SIZE SWITCH ASSY RAP).
Launch Version
WorkCentre 5225, 5230

071-940 Tray 3 Lift Up RAP

BSD-ON:7.1
The Tray 3 Level Sensor does not turn on within the designated time.
Initial Actions
• Remove and reinsert Tray 3
• Realign paper in the tray
• Object other than paper is in the tray
Procedure
1. Tray Level Sensor
2. Drive system from motor to bottom plate
February, 2008
2-533
Status Indicator Raps
073-211 , 071-940