Xerox WorkCentre 5222 Service Manual page 1209

Chain-
Link Content
780-081 Paper Type Priority: Coating 1 Finisher
Paper
780-084 Paper Type Priority: Reverse
780-096 User Define: Number of Paper Color 2
780-097 User Define: Number of Paper Color 3
780-098 User Define: Number of Paper Color 4
780-099 User Define: Number of Paper Color 5
780-108 Tray 6 (HCF) Paper Type
780-109 Tray 7 (HCF) Paper Type
780-110 Tray 6 (HCF) Priority
780-111 Tray 7 (HCF) Priority
780-141 Center Tray2 Offset Enable
780-142 Forced Duplex
780-145 IOT Control Offset Mode Staple
780-146 IOT Control Non Same FS Mix Size Staple Release
780-147 Max Staple Capacity
780-148 Max Staple Capacity: Small Size
780-149 Max Staple Capacity: Large Size
780-150 Max BiFold Capacity
780-151 Max Booklet Capacity
780-153 Medium Type APS Ignore Confirm
780-161 IOT Control SMH Free Size Detect
780-162 Tray1 Medium Attribute
780-163 Tray2 Medium Attribute
780-164 Tray3 Medium Attribute
780-165 Tray4 Medium Attribute
General Procedures
Table 7 IOT
Default Range
X: 255 1~255
X: 255 1~255
Null
Null
Null
Null
1: Plain paper 1~255
1: Plain paper 1~255
5 0~6
6 0~6
Offset per set 1~3
0 0~1
Offset per set 1~3
0~1
50 10~150
100 2~200
65 2~200
5 1~15
15 sheets 2~25
2 0~2
Auto Size Detect 0~1
0 0~2
0 0~2
0 0~2
0 0~2
February, 2008
6-70
Meaning
1~n: 1~n, X (Not applicable for Priority Tray for APS/ATS): 255 Duplication allowed. n is the
max. number of settings for paper type.
1~n: 1~n, X (Not applicable for Priority Tray for APS/ATS): 255 Duplication allowed. n is the
max. number of settings for paper type.
<P> 8 (1-byte) characters of alphanumerics and Katakana, <MF> For Japan: Maximum of
12 (2-byte) characters in alphanumerics, symbols, Katakana, hiraganas, and kanji.
For M/N: Maximum of 24 characters in ASCII.
<P> 8 (1-byte) characters of alphanumerics and Katakana, <MF> For Japan: Maximum of
12 (2-byte) characters in alphanumerics, symbols, Katakana, hiraganas, and kanji.
For M/N: Maximum of 24 characters in ASCII.
<P> 8 (1-byte) characters of alphanumerics and Katakana, <MF> For Japan: Maximum of
12 (2-byte) characters in alphanumerics, symbols, Katakana, hiraganas, and kanji.
For M/N: Maximum of 24 characters in ASCII.
<P> 8 (1-byte) characters of alphanumerics and Katakana, <MF> For Japan: Maximum of
12 (2-byte) characters in alphanumerics, symbols, Katakana, hiraganas, and kanji.
For M/N: Maximum of 24 characters in ASCII.
-
-
0 to 6. Note: Priority is in order of the numbers with 1 first in priority.
Multiple paper types cannot be set. Note: Depending on the number of installed Trays, 4 to 6
cannot be selected. Note: 0 means not to include this Tray in APS/ATS candidate Trays.
0 to 6. Note: Priority is in order of the numbers with 1 first in priority.
Multiple paper types cannot be set. Note: Depending on the number of installed Trays, 4 to 6
cannot be selected. Note: 0 means not to include this Tray in APS/ATS candidate Trays.
1: Offset per set, 2: Offset per job, 3: No offset
0: 1 Sided, 1: 2 Sided
1: Offset per set, 2: Offset per job, 3: No offset
TRUE (1): Staple, FALSE (0): Release
10 to 100 sheets (B Finisher), 25 to 75 sheets (C Finisher/D Finisher [50 sheets]), 50 to 100
sheets (D Finisher [100 sheets])
2 to 200 sheets
2 to 200 sheets
1 to 15 sheets
2~25 sheets
0: No user intervention (job is continued automatically by disregarding paper type specified
by job), 1: User intervention (choices are: [a] continue job by disregarding paper type speci-
fied by job) or [b] cancel job), 2: User intervention (choices are: [a] continue job by changing
type of paper in Tray or [b] cancel job).
TRUE (1): Detect custom size, FALSE (0): Auto Size Detect
0: Not specified, 1: Paper for color copy, 2: Paper for B/W copy
0: Not specified, 1: Paper for color copy, 2: Paper for B/W copy
0: Not specified, 1: Paper for color copy, 2: Paper for B/W copy
0: Not specified, 1: Paper for color copy, 2: Paper for B/W copy
Launch Version
WorkCentre 5225, 5230