Xerox WorkCentre 5222 Service Manual page 1169

Chain-link Name
764-124 Max Compile Sheet Count(Un-Staple/Plain Small)
764-125 Max Compile Sheet Count(Un-Staple/Heavy weight
paper 1 Big)
764-126 Max Compile Sheet Count(Un-Staple/Heavy weight
paper 1 Small)
764-127 Max Compile Sheet Count(Un-Staple/Special paper
Big)
764-128 Max Compile Sheet Count(Un-Staple/Special paper
Small)
Chain 954-xxx HFSI
Chain-
Link Name
954-800 Tray1 Last Two Digits of Feed Capacity (8 Digits)
954-800 Tray1 Fifth and Sixth Digits of Feed Capacity (8 Dig-
its)
954-800 Tray1 Third and Fourth Digits of Feed Capacity (8
Digits)
954-800 Tray1 First Two Digits of Feed Capacity (8 Digits)
954-801 Tray2 Last Two Digits of Feed Capacity (8 Digits)
954-801 Tray2 Fifth and Sixth Digits of Feed Capacity (8 Dig-
its)
954-801 Tray2 Third and Fourth Digits of Feed Capacity (8
Digits)
954-801 Tray2 First Two Digits of Feed Capacity (8 Digits)
954-802 Tray3 Last Two Digits of Feed Capacity (8 Digits)
954-802 Tray3 Fifth and Sixth Digits of Feed Capacity (8 Dig-
its)
954-802 Tray3 Third and Fourth Digits of Feed Capacity (8
Digits)
954-802 Tray3 First Two Digits of Feed Capacity (8 Digits)
954-803 Tray4 Last Two Digits of Feed Capacity (8 Digits)
General Procedures
IOT NVM List
Table 14 Finisher
Default Range 1 Count Remarks
10 1~50 Maximum volume of small-sized and unstapled plain paper that can be compiled.
(Paper length is 297.0 mm or less) (A-Fin)
1 1~25 Maximum volume of large-sized and unstapled heavy weight paper 1 that can be com-
piled. (Paper length is more than 297.0 mm) (A-Fin)
5 1~50 Maximum volume of small-sized and unstapled heavy weight paper 1 that can be com-
piled. (Paper length is 297.0 mm or less) (A-Fin)
1 1~25 Maximum volume of large-sized and unstapled special paper (heavy weight paper 2,
labels, transparency) that can be compiled. (Paper length is more than 297.0 mm) (A-
Fin)
1 1~50 Maximum volume of small-sized and unstapled special paper (heavy weight paper 2,
labels, and transparency) that can be compiled. (Paper length is 297.0 mm or less) (A-
Fin)
Table 15 HFSI
Default Range 1 Count Remarks
0 0~99 1 Only 0 clearance is possible in the write mode. ("0 clearance" means all byte changes to
0 at the same time.)
0 0~99 1 Only 0 clearance is possible in the write mode. ("0 clearance" means all byte changes to
0 at the same time.)
0 0~99 1 Only 0 clearance is possible in the write mode. ("0 clearance" means all byte changes to
0 at the same time.)
0 0~3 1 Only 0 clearance is possible in the write mode. ("0 clearance" means all byte changes to
0 at the same time.)
0 0~99 1 Only 0 clearance is possible in the write mode. ("0 clearance" means all byte changes to
0 at the same time.)
0 0~99 1 Only 0 clearance is possible in the write mode. ("0 clearance" means all byte changes to
0 at the same time.)
0 0~99 1 Only 0 clearance is possible in the write mode. ("0 clearance" means all byte changes to
0 at the same time.)
0 0~3 1 Only 0 clearance is possible in the write mode. ("0 clearance" means all byte changes to
0 at the same time.)
0 0~99 1 Only 0 clearance is possible in the write mode. ("0 clearance" means all byte changes to
0 at the same time.)
0 0~99 1 Only 0 clearance is possible in the write mode. ("0 clearance" means all byte changes to
0 at the same time.)
0 0~99 1 Only 0 clearance is possible in the write mode. ("0 clearance" means all byte changes to
0 at the same time.)
0 0~3 1 Only 0 clearance is possible in the write mode. ("0 clearance" means all byte changes to
0 at the same time.)
0 0~99 1 Only 0 clearance is possible in the write mode. ("0 clearance" means all byte changes to
0 at the same time.)
February, 2008
6-30
Launch Version
WorkCentre 5225, 5230