Xerox WorkCentre 5222 Service Manual page 1235

Chain 820-xxx FAX Service
Chain-
Link Content
820-002 Input Tray Specification in User Declaration
Mode
820-004 Selection Whether to Switch to Larger Size
Input Tray When Printing Paper Is Empty
820-005 Select PrivateOutTray for Fax
820-006 Output Tray of Confidential Box Print
820-010 Tray Selection for Ch0
820-011 Tray Selection for Ch1
820-012 Tray Selection for Ch2
820-013 Tray Selection for Ch3
820-014 Tray Selection for Ch4
820-015 Tray Selection for Ch5
820-016 2 Sided Print Setting for Print
820-019 Forced Polling
820-024 Broadcast / Multi-Poll Enable
820-025 90 Degree Rotation Setting for FAX Scan
820-026 FAX Scan Illegal Operation
General Procedures
Table 12 FAX Service
Default Range
0xDE 0~255
1 0~1
0 0~1
[Without C/D-Fin] 0 0~42
[With C/D-Fin] 4
[With HCS1] 5
[Without C/D-Fin] 0 0~42
[With C/D-Fin] 4
[With HCS1] 5
[Without C/D-Fin] 0 0~42
[With C/D-Fin] 4
[With HCS1] 5
[Without C/D-Fin] 0 0~42
[With C/D-Fin] 4
[With HCS1] 5
[Without C/D-Fin] 0 0~42
[With C/D-Fin] 4
[With HCS1] 5
[Without C/D-Fin] 0 0~42
[With C/D-Fin] 4
[With HCS1] 5
[Without C/D-Fin] 0 0~42
[With C/D-Fin] 4
[With HCS1] 5
0: 1 Sided 0~2
0: Off 0~1
0: Allow 0~1
1 0~1
1: Enable stored docu- 0~1
ments (Default before PL2
was 0)
February, 2008
6-96
Meaning
bit0: (unused), bit1: Tray1, bit2: Tray2, bit3: Tray3, bit4: Tray4, bit5: (unused), bit6: HCF1,
bit7: HCF
0: Do not perform larger size ATS, 1: Perform larger size ATS
0: Do not make tray exclusively for fax, 1: Make tray exclusively for fax
0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray 2, 4: Top Tray, 5: HCS1 Top
Tray,
6: HCS1 Stacker Tray, 33 to 42: Mailbox 1 to 10
*Options cannot be selected if they are not installed
0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray 2, 4: Top Tray, 5: HCS1 Top
Tray,
6: HCS1 Stacker Tray, 33 to 42: Mailbox 1 to 10
*Options cannot be selected if they are not installed
0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray 2, 4: Top Tray, 5: HCS1 Top
Tray,
6: HCS1 Stacker Tray, 33 to 42: Mailbox 1 to 10
*Options cannot be selected if they are not installed
0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray 2, 4: Top Tray, 5: HCS1 Top
Tray,
6: HCS1 Stacker Tray, 33 to 42: Mailbox 1 to 10
*Options cannot be selected if they are not installed
0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray 2, 4: Top Tray, 5: HCS1 Top
Tray,
6: HCS1 Stacker Tray, 33 to 42: Mailbox 1 to 10
*Options cannot be selected if they are not installed
0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray 2, 4: Top Tray, 5: HCS1 Top
Tray,
6: HCS1 Stacker Tray, 33 to 42: Mailbox 1 to 10
*Options cannot be selected if they are not installed
0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray 2, 4: Top Tray, 5: HCS1 Top
Tray,
6: HCS1 Stacker Tray, 33 to 42: Mailbox 1 to 10
*Options cannot be selected if they are not installed
0: 1 Sided, 1: 2 Sided
0: Off, 1: Forced Polling (When print becomes impossible due to printer failure, received
documents and other documents that became substitutional documents are forcibly
retrieved by polling from external Fax. --> Referred to by Host [FAXCont])
0: Allow, 1: Prohibit
0: 90 angle rotation setting Off, 1: 90 angle rotation setting On
0: Discard stored documents, 1: Enable stored documents
Launch Version
WorkCentre 5225, 5230