Iq5 Residual Image (Ghosting) Rap; Iq6 Background Rap - Xerox WorkCentre 5222 Service Manual

IQ5 Residual Image (Ghosting) RAP

Ghost images appear on the paper. Parts of the previous page or current page appear as ghost
images on the paper.
Procedure
Remove the Xero/Developer Cartridge (PL
The problem reoccurs.
Y N
End
Install a new Xero/Developer Cartridge (PL
lem reoccurs.
Y N
End
Remove the Fuser Unit (PL 5.1). Check for dirt on the surface of the Heat Roll. The
of the Heat Roll is clean.
Y N
Clean the Heat Roll. If there is difficulty in removing the dirt, replace the Fuser Unit
5.1)
Replace the MCU PWB (PL 9.1). If the problem persists, replace the ESS PWB
Launch Version
WorkCentre 5225, 5230
4.1) and reinstall. Turn the power Off/On and print.
4.1). Turn the power Off/On and print. The
(PL

IQ6 Background RAP

Toner smudges appear on the whole or part of the page. The smudges appear as extremely
bright gray stains.
Procedure
Check for dirt on the Platen Glass. The Platen Glass is clean.
Y N
Clean the Platen Glass. If there is a stubborn stain, replace the Platen Glass
Remove the Xero/Developer Cartridge
prob- The problem reoccurs.
Y N
End
Install a new Xero/Developer Cartridge
surface lem reoccurs.
Y N
End
(PL
Check the surface of the BTR for dirt and distortion. The surface of the BTR is clean and
there is no distortion.
9.1). Y N
Clean the BTR. If there is distortion, replace the BTR
Remove the HVPS and reinstall. Turn the power Off/On and print. The problem reoccurs.
Y N
End
Replace the MCU PWB (PL
(PL 9.2).
February, 2008
3-5
(PL 4.1) and reinstall. Turn the power Off/On and print.
(PL 4.1). Turn the power Off/On and print. The
(PL 2.6).
9.1). If the problem persists, replace the HVPS and the ESS PWB
(PL 11.3).
prob-
Image Quality
IQ5, IQ6