Removing The Tray Cable (J0St41304); Removing The Left Shaft Assembly To Remove The Tray Cable (J0St41305) - Xerox WorkCentre 5222 Service Manual

Figure 2 Removing the Tray Cable (j0st41304)
4. Remove the Left Shaft Assembly to remove the Tray Cable.
1. Remove the E-Clip.
2. Slide the bearings (x2).
3. Remove the Lift Shaft Assembly.
Repairs and Adjustments
REP 13.3.1
Figure 3 Removing the Left Shaft Assembly to remove the Tray Cable (j0st41305)
Replacement
(Figure 3)
1. To install, carry out the removal steps in reverse order.
February, 2008
4-92
Launch Version
WorkCentre 5225, 5230