Figure 2 Removing the Registration Assembly (j0st40213)
Replacement
1.
To install, carry out the removal steps in reverse order.
Launch Version
WorkCentre 5225, 5230
REP 2.5.1 Takeaway Roll
Parts List on
PL 2.5
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical power
applied to the machine.
1.
Remove the MPT Assembly.
2.
Disconnect the HCF (Paper Tray 6) and move it aside.
3.
Remove the L/H Upper Cover.
4.
Open the L/H Lower Cover.
5.
Remove the Gear Assembly.
a.
Remove the wire harness from the Gear Assembly holder
b.
Remove the screws (2)
b
Remove the screws (2)
Figure 1 Removing the Gear Assembly
6.
Removing the Gear Assembly
February, 2008
4-13
WARNING
(REP
7.1.1)
(REP
2.6.2)
(Figure
1)
a
Remove the wire harness
(Figure
2)
Repairs and Adjustments
REP 2.4.1, REP 2.5.1