035-701 Fax Protocol Rap; 035-702 Fax Protocol Rap - Xerox WorkCentre 5222 Service Manual

035-701 Fax Protocol RAP

BSD-ON:16.1/17.1
The disconnect signal was not received from the receiving Fax after transmission was not
established, or there is a time-out.
Procedure
There is a problem with the receiving Fax. Ask customer to cancel the job and resend.
Status Indicator Raps
035-701, 035-702

035-702 Fax Protocol RAP

BSD-ON:16.1/17.1
For the NSS/DTC (Non-Standard Setup/Digital Transmit Command) signal sent from the Fax
controller, the DCN (Disconnect) signal was received from the receiving Fax, or transmission
was rejected by the Select Receive function on the receiving Fax.
Procedure
There is a problem with the receiving Fax. Ask customer to cancel the job and resend.
Check the connections on the FAX PWB
February, 2008
2-468
(PL 9.2).
Launch Version
WorkCentre 5225, 5230