Information About Transfer Via Ldap Server - Auerswald COMpact 5200 Advanced Information

Information about Transfer via LDAP Server

Information about Transfer via LDAP Server
For the transfer of contact data from the LDAP server of the PBX to the IP
end device you have to enter the following values into the end device.
For the transfer of all selected contact groups (e. g. in the factory settings).
User name cn=auerswaldschandelah,dc=auerswald
•
• BaseDN dc=auerswald
Password auerswaldsecret
•
For the transfer of single contact groups (e. g. for contact group DECT1):
• User name cn=DECT1,dc=auerswald
• BaseDN ou=DECT1,dc=auerswald
• Password is configurable
For the transfer of contacts of a single subscriber (e. g. for the internal
number 31):
• User name phoneNumber=31,dc=Subscriber number
BaseDN dc=auerswald
•
• In this case the password is the user password of the subscriber.
Note: You must enter the complete character string.
Note: Ensure you type the capital and lower-case letters correctly, and
do not type any blank spaces before or after the , and = characters.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 1107 -