Debugging Mpls L2Vpn - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches
[Quidway] ccc clink interface vlan-interface 201 transmit-lsp tlsp receive-lsp
rlsp
# Create a local CCC connection, with the name of clink, and the interfaces connecting
to the two CEs being the interfaces of VLAN 201 and VLAN 301 respectively.
[Quidway] ccc clink interface vlan-interface 201 out-interface interface
vlan-interface 301

3.1.2 debugging mpls l2vpn

Syntax
debugging mpls l2vpn { all | advertisement | error | event | connections [ interface
vlan-interface vlan-id ] }
undo debugging mpls l2vpn { all | advertisement | error | event | connections
[ interface vlan-interface vlan-id ] }
View
User view
Parameter
all: Enables/Disables all types of L2VPN Debugging.
advertisement: Enables/Disables Debugging for L2VPN BGP/LDP advertisement
messages.
error: Enables/Disables Debugging for L2VPN error messages.
event: Enables/Disables Debugging for L2VPN event messages.
connections: Enables/Disables Debugging for connection messages.
vlan-id: ID of the VLAN whose interface is used to establish the connection.
Description
Use the debugging mpls l2vpn command to enable specific type of L2VPN
debugging.
Use the undo debugging mpls l2vpn command to disable specific type of L2VPN
debugging.
Example
# Enable all types of L2VPN Debugging.
<Quidway> debugging mpls l2vpn all
Chapter 3 MPLS L2VPN Configuration Commands
Huawei Technologies Proprietary
3-2