Huawei Quidway S8500 Series Command Manual page 729

Command Manual – MPLS
Quidway S8500 Series Routing Switches
Negotiated Hello hold time:45
Hello packets sent/rcv:6457/6453
Remote Index: 4
Peer Address: 1.1.0.3
Configured KeepAlive hold time:60, Configured Hello hold time:45
Negotiated Hello hold time:0
Hello packets sent/rcv:0/0
Remote Index: 7
Peer Address: 1.1.1.7
Configured KeepAlive hold time:60, Configured Hello hold time:45
Negotiated Hello hold time:0
Hello packets sent/rcv:0/0
1.2.8 display mpls ldp session
Syntax
display mpls ldp session [ | begin text | exclude text | include text ]
View
Any view
Parameter
|: Displays matched outputs.
begin: Displays the outputs matching the regular expression from the first line.
exclude: Displays the outputs excluding those lines matching the regular expression.
include: Displays only those outputs matching the regular expression.
text: Contents of the regular expression.
Description
Use the display mpls ldp session command to know the session between peer
entities.
By default, it displays the session between peer entities.
Related command: mpls ldp enable.
Example
# Display the session between peer entities.
<Quidway> display mpls ldp session
Local LDP ID: 1.1.1.9:5;
Chapter 1 MPLS Basic Configuration Commands
Transport Address: 2.2.2.2
Transport Address: 2.2.2.2
Peer LDP ID: 4.4.4.9:0
Huawei Technologies Proprietary
1-19