Vpn-Instance - Huawei Quidway S8500 Series Command Manual

Command Manual – Security
Quidway S8500 Series Routing Switches
Example
# Specify to send the username without domain name to RADIUS scheme.
[Quidway-radius-huawei] user-name-format without-domain

2.2.30 vpn-instance

Syntax
vpn-instance vpn-name
View
RADIUS scheme view
Parameter
vpn-name: The name of the VPN instance, which is a string of 1 to 19 characters.
Description
Use the vpn-instance command to configure the VPN that the RADIUS scheme
belongs to.
Use the undo vpn-instance command to cancel the configuration for VPN.
The VPN in this command must exist and must be assigned with an RD. One RADIUS
scheme can only be bound to one VPN.
Note:
The nas-ip configured must belong to the VLAN bound to the specified VPN after a
VPN is specified by the RADIUS scheme; otherwise the packets cannot be sent. Also
pay attention to this point when configuring global RADIUS nas-ip.
Related command: radius scheme.
Example
# Specify the VPN to which the RADIUS server belongs in the RADIUS scheme
"huawei" as vpn1.
[Quidway-radius-huawei] vpn-instance vpn1
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Huawei Technologies Proprietary
2-49
Configuration Commands