Broadcast-Restrain; Description - Huawei Quidway S8500 Series Command Manual

Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches

3.1.2 broadcast-restrain

Syntax
broadcast-restrain restrain-number
View
VSI-LDP view
Parameter
restrain-number: VSI broadcast suppression percentage.

Description

Use the broadcast-restrain command to configure the VPN broadcast suppression
percentage, which is in the range of 0 to 100. You cannot set the percentage to 0. In the
VSI, the part of broadcast traffic (including broadcast, multicast, unknown unicast)
beyond the suppression percentage is discarded.
By default, the broadcast suppression percentage is 5%.
Example
# Set the broadcast suppression percentage of the VPLS instance Huawei to 10%.
[Quidway-vsi-Huawei-ldp] broadcast-restrain 10
3.1.3 description
Syntax
description TEXT
undo description
View
VSI-LDP view
Parameter
TEXT: Description text for the specified VPLS instance, an alphanumeric character
string in length of 1 to 50.
Description
Use the description command to set the description of current VPLS instance.
Use the undo description command to remove the description.
Example
# Set the description of the VPLS instance Huawei to Huawei Technologies Co., Ltd.
Huawei Technologies Proprietary
3-2
Chapter 3 VPLS Configuration Commands