Huawei Quidway S8500 Series Command Manual page 628

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches
Description
Use the display acl running-packet-filter command to display the total number of
ACL rules that are applied on the specified card.
Example
# Display the total number of ACL rules that are applied on the slot 5.
<Quidway> display acl remaining entry slot 5
Slot: 5
Resource
Type
--------------------------------------------------------------------------
METER
METER
RULE
RULE
ACTION
ACTION
Table 1-1 The description of the information on display
Resource Type
Total Number
Reserved Number
Configured Number
Remaining Number
Start Port Name, End Port Name
1.1.4 display acl running-packet-filter
Syntax
display acl running-packet-filter { all | interface interface-type interface- number |
vlan vlan-id }
Total Reserved Configured
Number Number
256 0
256 0
1024 0
1024 0
1024 0
1024 0
Field
Huawei Technologies Proprietary
1-4
Remaining
Number Number
0 256
0 256
0 1024
0 1024
0 1024
0 1024
Description
Resource type
METER: the resource is the flow meter
resource;
RULE: the resource is the rule resource;
ACTION: the resource is action resource
The total number of ACL rules that are
supported by the hardware
The number of the reserved ACL rules
The number of the ACL rules that have been
configured
The number of the remaining ACL rules
The names of the start port and the end port
Chapter 1 ACL Commands
Start End
Port Name Port Name
GE5/1/1 GE5/1/12
GE5/1/13 GE5/1/24
GE5/1/1 GE5/1/12
GE5/1/13 GE5/1/24
GE5/1/1 GE5/1/12
GE5/1/13 GE5/1/24