Display Time-Range - Huawei Quidway S8500 Series Command Manual

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches
Parameter
default: Displays the default flow template of the system.
interface interface-type interface-number: Displays the flow template applied on the
specified port.
slot slotid: Displays the flow template applied on the specified card.
user-defined: Displays the user-defined flow template.
Description
Use the display flow-template command to view the detailed configuration of flow
template. The configuration includes which parameters the flow template defines and
which ports/cards is the flow template applied on.
Quidway S8500 Series Routing Switches (hereinafter referred to as S8500 series)
support two flow templates: one is user-defined; the other is the default one. If you do
not input any parameter for this command, the detailed configuration of all flow
templates will be displayed.
Related command: flow-template user-defined.
Example
# Display information about the default flow-template.
<Quidway> display flow-template default
default flow template : ip-protocol tcp-flag sport dport icmp-type icmp-code
sip 0.0.0.0 dip 0.0.0.0 vlanid

1.1.6 display time-range

Syntax
display time-range { all | name }
View
Any view
Parameter
all: Displays all time ranges.
name: Time range name, string starting with an English letter ([a-z, A-Z]) and in the
range of 1 to 32 characters.
Description
Use the display time-range command to view the configuration and status of current
time range. For active time range, the system shows "active" and "inactive" for inactive
time range.
Huawei Technologies Proprietary
1-6
Chapter 1 ACL Commands