Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches
[Quidway-vsi-Huawei-ldp] qos 3
3.1.15 shut
Syntax
shut
undo shut
View
VSI-LDP view
Parameter
None
Description
Use the shut command to shut down the VPN service of the VPLS instance. When the
service of the VSI is shut down, the system does not process any traffic for this VSI.
Use the undo shut command to restore the VPLS service of the VSI.
Example
# Disable VPLS for the VPLS instance Huawei.
[Quidway-vsi-Huawei-ldp] shut
# Enable VPLS for the VPLS instance Huawei.
Quidway-vsi-Huawei-ldp] undo shut
3.1.16 vsi
Syntax
vsi vsi-name [ static ]
undo vsi vsi-name
View
System view
Parameter
vsi-name: Name for a VPLS instance, an alphanumeric character string in the length of
1 to 20.
static: Indicates that the peer discovery mechanism is static manual configuration,.
Huawei Technologies Proprietary
3-13
Chapter 3 VPLS Configuration Commands