Huawei Quidway S8500 Series Command Manual page 535

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
Parameter
vlan-interface interface-number: VLAN interface number of the router, used to specify
the interface. If the parameters are omitted, information about all the interfaces running
IGMP will be displayed.
Description
Use the display igmp interface command to view the IGMP configuration and running
information on an interface.
Example
# View the IGMP configuration and running information of all interfaces.
<Quidway> display igmp interface
Vlan-interface1 (10.153.17.99):
IGMP is enabled
Current IGMP version is 2
Value of query interval for IGMP(in seconds): 60
Value of other querier time out for IGMP(in seconds): 120
Value of maximum query response time for IGMP(in seconds): 10
Value of robust count for IGMP: 2
Value of startup query interval for IGMP(in seconds): 15
Value of last member query interval for IGMP(in seconds): 1
Value of query timeout for IGMP version 1(in seconds): 400
Policy to accept IGMP reports: none
Querier for IGMP: 10.153.17.99 (this router)
IGMP group limit is 1024
No IGMP group reported
Table 4-2 Description on the fields of the display igmp interface command
IGMP version
query interval
querier timeout
max query response time
robust count
startup query interval
last member query interval
Field
IGMP version
General query interval
Querier timeout time
Maximum query response time
IGMP robust count, namely the number of times IGMP
querier sends IGMP specific group query packet when
it receives an IGMP Leave packet from a host
Startup query interval
The interval at which the IGMP querier sends IGMP
specific group query packets when it receives an
IGMP leave packet from a host
Huawei Technologies Proprietary
Chapter 4 IGMP Configuration Commands
Description
4-3