Display Rmon Eventlog - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
Table 6-2 Description on the fields of the display rmon event command
Event table 1
VALID
Description
Cause log-trap when triggered,
Last triggered at 0days 00h:02m:27s

6.1.3 display rmon eventlog

Syntax
display rmon eventlog [ event-number ]
View
Any view
Parameter
event-number: Entry index of event table.
Description
Use the display rmon eventlog command to view RMON event log.
The display includes event index in the event table, the status of the event, the time at
which the event log is generated (this time starts from the system initialization or
booting and counted in milliseconds), and event description.
Example
# Show event log of RMON.
<Quidway> display rmon eventlog 1
Event table 1 owned by null is VALID.
Generates eventLog 1.1 at 0days 00h:01m:39s.
Description: The 1.3.6.1.2.1.16.1.1.1.4.1 defined in alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Generates eventLog 1.2 at 0days 00h:02m:27s.
Description: The alarm formula defined in private alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Field
Huawei Technologies Proprietary
6-3
Chapter 6 RMON Configuration Commands
Description
Index 1 in event table
The entry corresponding to the index is
valid
Event description
When the event is triggered, it will cause
the log-trap.
The last triggered time is 00h:02m:27s