Query Vlanstate - Huawei Quidway S8500 Series Command Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
[Quidway-lanswitch3/1/3-/] query vdsllink 1
Waiting.....
======================Result of Inquiring VDSL Link======================
------------------------------LinkNo:1--------------------------------
ErrNo
CfgDsRate:0M
FailCont :0
LtTxPsd
RtTxPSD
----------------------------------End------------------------------
Note:
This command is only applicable to the configuration of S3026V Ethernet switches on
the NMS.

1.3.23 query vlanstate

Syntax
query vlanstate
View
lanswitch view
Parameter
None.
Description
Use the query vlanstate command to query the VLAN state of the switch.
Example
# Query the VLAN state of the Ethernet switch with the position parameter of "8/1/1-/"
[Quidway-lanswitch8/1/1-/] query vlanstate
Waiting.....
the lanswtich's vlan state :Enable
:0 Status
ActUsRate:0M
LtRxSNR
:0dBm/hz RtRxSNR
:0dBm/hz RtHVer
Huawei Technologies Proprietary
Chapter 1 HGMP V1 Configuration Commands
:0 CfgUsRate:0M
ActDsRate:0M
:0 LtRsCount:0
:0 RtRsCount:0
:0 RtSVer :0
1-46