Chapter 1 Mpls Basic Configuration Commands - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches

Chapter 1 MPLS Basic Configuration Commands

1.1 MPLS Basic Configuration Commands
1.1.1 debugging mpls lspm
Syntax
debugging mpls lspm { agent | all | event | ftn | interface | packet | policy | process
| vpn }
undo debugging mpls lspm { agent | all | event | ftn | interface | packet | policy |
process | vpn }
View
User view
Parameter
agent: Enables all MPLS Agent debugging.
all: Enables all MPLS-related debugging.
event: Enables debugging for various MPLS events.
ftn: Enables MPLS FTN debugging.
interface: Enables the MPLS debugging on the message sending/receiving interface.
packet: Enables MPLS packet debugging.
policy: Enables MPLS policy debugging.
process: Enables debugging of MPLS internal processing.
vpn: Enables all MPLS VPN debugging.
Description
Use the debugging mpls lspm command to enable various LSPM debugging.
Use the undo debugging mpls lspm command to disable the corresponding
debugging.
By default, all debugging is disabled.
This command is used to the debug MPLS LSPM. As running the debugging will affect
the performance of the Quidway S8500 Series Routing Switches, you are advised to
use the command with caution.
Example
# Enable all MPLS VPN debugging.
Chapter 1 MPLS Basic Configuration Commands
Huawei Technologies Proprietary
1-1