Set Address Agedtime - Huawei Quidway S8500 Series Command Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
Example
# Search an address entry in the unicast address table of the Ethernet switch with
position parameter of 3/1/3-/.
[Quidway-lanswitch3/1/3-/] search uniaddr 0e0-fc11-1001
Waiting.....
=================Search addrTab result========================
No ErrNo
0 0
================================================================
ErrNo Mean:0-Success,1-invalid Mac,2-Vlanid out rang 5-not found addrTab
Table 1-17 Description on the fields of the search uniaddr command
Field
Index
ErrNo
Mac-Address
Port
Aged
PortMask
McType

1.3.26 set address agedtime

Syntax
set address agedtime agedtimevalue
View
lanswitch view
Mac-Address
00-e0-fc-11-10-01
Unicast MAC address entry number
Error number, which are described as follows:
0: The operation is successful
1: MAC address error
2: VLAN ID out of range
5: No address table found
Unicast address
Port number
Indicates whether this entry can be aged.
Port mask, which indicates the ports in a unicast group. For
example, value of 0 indicates the multicast group contains no
port; value of 10 indicates the multicast group contains port 2;
value of 110 indicates the multicast group contains ports 2 and
3; value of 10101 indicates the multicast group contains ports 1,
3 and 5; and so on.
Indicates how a multicast group forwards data to CPU. The
meanings of its value are:
0: Do not forward to CPU
1: Forward to CPU
2: Forward IGMP packets to the CPU
Huawei Technologies Proprietary
1-49
Chapter 1 HGMP V1 Configuration Commands
VlanId Port Aged
- 1 Aged
Description
PortMask mcType
- -