Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches
Vlan-interface2
3
Vlan-interface2
3
Vlan-interface3
3
1.1.6 display nat statistics
Syntax
display nat statistics slot slotno
View
Any view
Parameter
slotno: Number of the slot in which the NAT service processor board currently
functioning resides.
Description
Use the display nat statistics command to display the statistics of the current NAT
information.
Example
# Display the statistics of the current NAT information.
<Quidway> display nat statistics slot 3
Running information in slot 3:
active PAT session table count in CPU:0
active PAT session table count in NP:1
active NO-PAT session table count:0
active SERVER session table count:3
the number of good packet in NP:0
the number of bad packet in NP:0
Table 1-1 Description on the filed of the display nat statistics slot command
Running information in slot
active PAT session table count in
CPU
active PAT session table count in NP
active NO-PAT session table count
1.1.1.1
2.2.2.2
2.2.2.3 69(tftp)
Field
Huawei Technologies Proprietary
1-5
Chapter 1 NAT Configuration Commands
80(www)
4.4.4.4
53(dns)
3.3.3.3
4.4.4.5 69(tftp) 17(udp)
Description
Slot information
Number of NAPT entries in CPU
Number of NAPT entries in NP
Number of NAT entries in CPU
80(www) 6(tcp)
53(dns) 17(udp)