Nat Ftp Server Global - Huawei Quidway S8500 Series Command Manual

Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches
# Set the thresholds for controlling the setup rate of all address.
[Quidway] nat blacklist limit rate 200
#Select a special threshold for the setup rate of 2.2.2.2.
[Quidway] nat blacklist limit rate source 2.2.2.2 nat outbound

1.1.10 nat ftp server global

Syntax
nat ftp server global global-addr global-port inside host-addr host-port slot slotno
undo nat ftp server global global-addr global-port inside host-addr host-port slot
slotno
View
VLAN interface view
Parameter
global-addr: A valid IP address provided for external accesses.
global-port: The port number provided for the FTP service of external accesses,
ranging from 0 to 12287, among which 21 can be replaced by FTP.
host-addr: The IP address of the server in internal LAN.
host-port: The service port number provided by nonstandard FTP servers, ranging from
0 to 65535, among which 21 can be replaced by FTP.
slotno: The number of the slot that the NAT board resides in.
Description
Use the nat ftp server global command to configure nonstandard internal servers.
Use the undo nat ftp server global command to remove the configured nonstandard
internal servers.
Related command: nat server.
Huawei Technologies Proprietary
1-10
Chapter 1 NAT Configuration Commands