Huawei Quidway S8500 Series Command Manual page 873

Command Manual – Security
Quidway S8500 Series Routing Switches
Configuration: Transmit Period
Total maximum 802.1x user resource number is 2048
Total current used 802.1x resource number is 0
Ethernet3/1/1
802.1X protocol is disabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
The port is a(n) authenticator
Authenticate Mode is auto
Port Control Type is Mac-based
Max on-line user number is 1024
... (Omitted)
Table 1-1 Description of 802.1x configuration information
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
DHCP-launch is disabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
Transmit Period
Handshake Period
Quiet Period
Quiet Period Timer is disable
Supp Timeout
Server Timeout
The maximal retransmitting times
Total maximum 802.1x user resource
number
Quiet Period
Supp Timeout
The maximal retransmitting times
is link-down
Field
Huawei Technologies Proprietary
1-3
Chapter 1 802.1x Configuration Commands
30 s, Handshake Period
60 s, Quiet Period Timer is disabled
30 s, Server Timeout
Description
802.1X protocol is enabled on the switch.
CHAP authentication is enabled
If any user configures a static IP without
authorization in DHCP environment, the
switch will trigger authentication on the
user.
The system does not check the access of
users who log on through a proxy.
Transmit interval timer
The interval of sending handshake
packets of 802.1x
Quiet period set by Quiet timer
Quiet Period Timer is disable
Timeout timer
authentication
Timeout timer for Authentication Server
The maximal times for the Ethernet switch
to retransmit authentication
frames to access user
The maximum number of access users
allowed
30 s
100 s
2
for Supplicant
request