Mpls Ldp Password; Mpls Ldp Path-Vectors - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches

1.2.13 mpls ldp password

Syntax
mpls ldp password [ cipher | simple ] password
undo mpls ldp password
View
VLAN interface view, remote-peer view
Parameter
cipher: The password in configuration file will be displayed in cipher-text.
simple: The password in configuration file will be displayed in plain-text.
password: User password.
Description
Use the mpls ldp password command to configure MD5 authentication password for
the LDP. After this configuration, the MD5 authentication is adopted for LDP on the
interface.
Use the undo mpls ldp password command to delete the configuration.
Example
# Configure the LDP authentication mode as MD5, plain-text password 123.
<Quidway>system-view
[Quidway] interface vlan-interface 201
[Quidway-vlan-interface201] mpls ldp password simple 123

1.2.14 mpls ldp path-vectors

Syntax
mpls ldp path-vectors pv-number
undo mpls ldp path-vectors
View
System view
Parameter
pv-number: Maximum value of path vector, ranging from 1 to 32.
Description
Use the mpls ldp path-vectors command to set the maximum value of path vector.
Chapter 1 MPLS Basic Configuration Commands
Huawei Technologies Proprietary
1-23