Clearing Mbgp Statistics; Debugging Mbgp - Huawei S6700 Series Configuration Manual

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
Procedure
l
l
l
l
l
----End

9.8.2 Clearing MBGP Statistics

You can clear statistics of either MBGP route flapping or MBGP route dampening.
Context
The MBGP statistics cannot be restored after you clear them. So, confirm the action before you
use the command.
Procedure
l
l
----End

9.8.3 Debugging MBGP

Routers generate debugging information after you enable the debugging of modules in the user
view. Debugging information shows the contents of packets sent or received by the debugged
module.
Context
Debugging affects the performance of the system. So, after debugging, run the undo debugging
all command to disable it immediately.
Issue 01 (2012-03-15)
Run the reset bgp multicast ipv4-address command in the user view to reset the MBGP
connection between specified peers.
Run the reset bgp multicast all command in the user view to reset all MBGP connections.
Run the reset bgp multicast group group-name command in the user view to reset the
MBGP connections between all peers in the peer group.
Run the reset bgp multicast external command in the user view to reset external
connections.
Run the reset bgp multicast internal command in the user view to reset internal
connections.
CAUTION
Run the reset bgp multicast dampening [ ipv4-address [ mask | mask-length ] ] command
in the user view to clear the MBGP routing information.
Run the reset bgp multicast flap-info [ ipv4-address [ mask-length | mask ] | as-path-
filter { as-path-filter-number | as-path-filter-name } | regrexp regrexp ] command in the
user view to clear the information about the MBGP route flapping.
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 MBGP Configuration
581