Igmp-Snooping Host-Aging-Time; Igmp-Snooping Max-Response-Time - Huawei Quidway S8500 Series Command Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches

1.1.8 igmp-snooping host-aging-time

Syntax
igmp-snooping host-aging-time seconds
undo igmp-snooping host-aging-time
View
System view
Parameter
seconds: Port aging time for the multicast group member, ranging from 200 to 1000
seconds. By default, it is 260 seconds.
Description
Use the igmp-snooping host-aging-time command to configure the port aging time of
the multicast group members.
Use the undo igmp-snooping host-aging-time command to restore the default value.
This command is used to set the aging time of the multicast group member so that the
refresh frequency can be controlled. When the group members change frequently, the
aging time should be comparatively short, and vice versa.
Related command: igmp-snooping.
Example
# Set the aging time to 300 seconds.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] igmp-snooping host-aging-time 300

1.1.9 igmp-snooping max-response-time

Syntax
igmp-snooping max-response-time seconds
undo igmp-snooping max-response-time
View
System view
Parameter
seconds: Maximum response time for a query, ranging from 1 to 25 seconds. By default,
it is 1 second.
Chapter 1 IGMP Snooping Configuration Commands
Huawei Technologies Proprietary
1-10