Huawei Quidway S8500 Series Command Manual page 894

Command Manual – Security
Quidway S8500 Series Routing Switches
state { active | block }: Configures to display the local users in the specified state.
active means that the system allows the user requesting network service and block
means the system does not allow the user requesting network service.
user-name user-name: Configures to display a local user specified with user-name .
user-name is the argument specifying the username. It is a character string not
exceeding 32 characters, excluding "/", ":", "*", "?", "<" and ">". The @ character can
only be used once in one username. The pure username (the part before @, namely
the user ID) cannot exceed 55 characters.
vlan vlanid: Configures to display the local users belonged to specified VLAN. vlanid is
the integer, ranging from 1 to 4094.
Description
Use the display local-user command to view the relevant information about all the
local users or the specified one(s).
The output can help you with the fault diagnosis and troubleshooting related to local
user.
By default, this command displays the relevant information about all the local users.
Related command: local-user.
Example
# Display the relevant information of all the local users.
<Quidway> display local-user
The contents of local user user1:
State:
Idle Cut:
AccessLimit:
Bind location:
Vlan ID:
IP address:
MAC address:
Total 1 local user(s) Matched,1 listed.
Table 2-1 Description of output information of the display local-user command
State
Idle Cut
AccessLimit
Bind location
Active
Disable
Disable
Disable
Disable
Disable
Disable
Field
State
Idle cut switch
Limit on the number of access connections
Whether to be bound with port
Huawei Technologies Proprietary
Chapter 2 AAA and RADIUS/HWTACACS Protocol
ServiceType Mask: None
Current AccessNum: 0
Description
2-8
Configuration Commands