Peer Vpn-Instance Enable - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches
undo peer peer-address upe
View
VPNv4 subaddress family view
Parameter
peer-address: Peer IP address.
Description
Use the peer upe command to configure BGP peer as the UPE of hierarchical
BGP/MPLS VPN.
Use the undo peer upe command to delete this configuration.
Example
# Configure BGP peer as the UPE of hierarchical BGP/MPLS VPN.
[Quidway-bgp] ipv4-family vpnv4
[Quidway-bgp-af-vpn] peer 1.1.1.1 upe

2.1.53 peer vpn-instance enable

Syntax
peer group-name vpn-instance vpn-instance-name enable
undo peer group-name vpn-instance vpn-instance-name enable
View
BGP-VPNv4 sub-address family view
Parameter
group-name: Name of a peer group.
vpn-instance-name: Name of the VPN instance the CE peer belongs to.
enable: Enable VPNv4 function for the CE.
Description
Use the peer vpn-instance enable command to enable the VPNv4 function for the
BGP peer group of a CE.
Use the undo peer vpn-instance enable command to disable the function.
By default, the VPNv4 function is disabled.
Example
# Enable the VPNv4 function for the peer group of a CE.
Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-44