Ip Binding Vpn-Instance - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches
Description
Use the import-route ospf command to enable to import OSPF route.
Use the undo import-route ospf command to disable to import OSPF route.
Caution:
By default, the process ID is 1.
Example
# Enable to import an OSPF route with process ID 100.
[Quidway]ip vpn-instance sphinx
[Quidway-vpn-sphinx]route-distinguisher 168.168.55.1:85
[Quidway-vpn-sphinx]quit
[Quidway]bgp 352
[Quidway-bgp]ip vpn-instance sphinx
[Quidway-bgp-af-vpn-instance] import-route ospf 100

2.1.20 ip binding vpn-instance

Syntax
ip binding vpn-instance vpn-instance-name
undo ip binding vpn-instance vpn-instance-name
View
VLAN interface view
Parameter
vpn-instance-name: Name assigned to VPN-instance.
Description
Use the ip binding vpn-instance command to bind a VLAN interface to a
VPN-instance.
Use the undo ip binding vpn-instance command to delete the binding.
By default, global routing table is used.
You need to reconfigure the IP address for an interface since this command deletes the
original IP address.
Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-18