Enable Snmp Trap - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
Table 5-5 Description on the fields of the display snmp-agent usm-user command
User name
Group name
Authencation Mode
Privacy Mode
Engine ID
Acl

5.1.8 enable snmp trap

Syntax
enable snmp trap updown
undo enable snmp trap updown
View
Ethernet port view / VLAN interface view
Parameter
None
Description
Use the enable snmp trap updown command to enable current port or VLAN
interface to transmit the LINK UP and LINK DOWN trap messages.
Use the undo enable snmp trap updown command to disable current port or VLAN
interface to transmit the LINK UP and LINK DOWN trap messages.
The enable snmp trap command should be used in cooperation with the snmp-agent
trap enable and the snmp-agent target-host commands. The snmp-agent
target-host command is used to specify which hosts can receive the trap messages.
To enable the transmitting of trap messages, you must execute the snmp-agent
target-host command at least once.
Example
# Enable current port Ethernet6/1/1 to transmit the LINK UP and LINK DOWN trap
information with the community name public
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway-Ethernet6/1/1] snmp trap updown enable
Field
Character string identifying the SNMP user
Character string identifying the group the user belongs to
Authentication code
Personal code
Character string identifying the SNMP device
Character string identifying the access control list
Huawei Technologies Proprietary
Chapter 5 SNMP Configuration Commands
Description
5-9