Info-Center Console Channel; Info-Center Enable - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches

4.6.7 info-center console channel

Syntax
info-center console channel { channel-number | channel-name }
undo info-center console channel
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Specifies the channel name. The name can be channel7, channel8,
channel9, console, logbuffer, loghost, monitor, snmpagent, trapbuffer, logfile.
Description
Use the info-center console channel command to configure the channel through
which the log information is output to the console.
By default, Ethernet switches do not output log information to the console.
This command takes effect only after system logging is started.
Related command: info-center enable, display info-center.
Example
# Configure to output log information to the console through channel 0.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center console channel 0

4.6.8 info-center enable

Syntax
info-center enable
undo info-center enable
View
System view
Parameter
None
Huawei Technologies Proprietary
4-41
Chapter 4 System Maintenance Commands