Port Can-Access Vlan-Acl; Display Vlan-Acl-Member-Ports - Huawei Quidway S8500 Series Command Manual

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches
Use the undo traffic-statistic command to cancel traffic statistics.
The statistics information contains the hardware matching times in packet forwarding.
Example
# In VLAN 2, run traffic statistics for the packets which match the permit rules in ACL
2000.
[Quidway-vlan2] traffic-statistic inbound ip-group 2000

4.1.7 port can-access vlan-acl

Syntax
port can-access vlan-acl vlan vlan-id
View
Ethernet port view
Parameter
vlan-id: VLAN ID, in the range of 1 to 4,094.
Description
Use the port can-access vlan-acl command to synchronize VLAN-ACL configuration
of the specified VLAN to the port.
When being added to a VLAN, a port automatically synchronizes VLAN-ACL
configuration of the VLAN. The synchronization fails if system resources are not
enough. In this case, you can delete part of configuration of the card and then use this
command to manually synchronize the ACL rules applied to the VLAN to the specified
port.
Example
# Synchronize ACL configuration of VLAN 5 to Ethernet3/1/1 port manually.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet3/1/1
[Quidway-Ethernet3/1/1]port can-access vlan-acl vlan 5

4.1.8 display vlan-acl-member-ports

Syntax
display vlan-acl-member-ports vlan vlan-id
Chapter 4 VLAN-ACL Configuration Commands
Huawei Technologies Proprietary
4-10