Huawei Quidway S8500 Series Command Manual page 1081

Command Manual – System Management
Quidway S8500 Series Routing Switches
Parameter
size: Configures the size of buffer.
summary: Number of statistical logs.
sizenum: Size of buffer (number of messages which can be kept), ranging from 1 to
1024. By default, the size of the buffer is 256.
level: level.
levelnum: Information level value, ranging from 1 to 8.
emergencies, alerts, critical, debugging, errors, informational, notifications,
warnings are the names of the eight log severity levels. You can type the values or
names of the desired severity levels, which are equivalent, in commands. Table 4-5
gives the details.
Description
Use the display trapbuffer command to view the attribute of trapbuffer and the
information recorded in trapbuffer.
Example
# Show the system trapbuffer attribute and the log information in trapbuffer.
<Quidway> display trapbuffer
Trapping Buffer Configuration and contents:
enabled
allowed max buffer size : 1024
actual buffer size : 256
channel number : 3 , channel name : trapbuffer
dropped messages : 0
overwrote messages : 0
current messages : 6
#Dec 31 14:01:25 2004 Quidway DEV/2/LOAD FINISHED:
Trap 1.3.6.1.4.1.2011.2.23.1.12.1.20: frameIndex is 0, slotIndex 0.4
#Dec 31 14:01:33 2004 Quidway DEV/2/BOARD STATE CHANGE TO NORMAL:
Trap 1.3.6.1.4.1.2011.2.23.1.12.1.11: frameIndex is 0, slotIndex 0.2
#Dec 31 14:01:40 2004 Quidway DEV/2/BOARD STATE CHANGE TO NORMAL:
Trap 1.3.6.1.4.1.2011.2.23.1.12.1.11: frameIndex is 0, slotIndex 0.
Huawei Technologies Proprietary
4-39
Chapter 4 System Maintenance Commands