Revision-Level; Stp - Huawei Quidway S8500 Series Command Manual

Command Manual – STP
Quidway S8500 Series Routing Switches
Related command: display stp.
Example
# Clear the statistics information on the ports from Ethernet2/1/1 through Ethernet2/1/3
<Quidway> reset stp interface Ethernet 2/1/1 to Ethernet 2/1/3

1.1.10 revision-level

Syntax
revision-level level
undo revision-level
View
MST region view
Parameter
level: Specifies the MSTP revision level, ranging from 0 to 65535. By default, MSTP
revision level takes 0.
Description
Use the revision-level command to configure MSTP revision level of the switch.
Use the undo revision-level command to restore the default revision level.
MSTP revision level, together with region name and VLAN mapping table, is used for
determining the MST region to which the switch belongs.
Related
vlan-mapping modulo and active region-configuration.
Example
# Set the MSTP revision level of the switch MST region to 5.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway]stp region-configuration
[Quidway-mst-region] revision-level 5

1.1.11 stp

Syntax
stp { enable | disable }
undo stp
command: instance,
Huawei Technologies Proprietary
Chapter 1 MSTP Configuration Commands
region-name, check
1-11
region-configuration,