Display Nat Server - Huawei Quidway S8500 Series Command Manual

Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches
Parameter
None
Description
Use the display nat outbound command to display the information about all NAT
mapping entries configured by the nat outbound command.
Example
# Display the information about all NAT mapping entries configured by the nat
outbound command.
<Quidway> display nat outbound
NAT outbound information:
[no-pat] slot:3
slot:3
[no-pat] slot:3

1.1.5 display nat server

Syntax
display nat server
View
Any view
Parameter
None
Description
Use the display nat server command to display information about all the internal
servers.
Example
# Display information about all the internal servers.
<Quidway> display nat server
Server in private network information:
Slot
Vlan-interface2:
Vlan-interface2: acl(
Vlan-interface3: acl(
Vlan-interface3: acl(
Interface GlobalAddr
Huawei Technologies Proprietary
Chapter 1 NAT Configuration Commands
acl(2000) ---
2000) --- NAT address-group(0)
2000) --- NAT address-group(1)
2000) --- interface slot:3
GlobalPort InsideAddr
1-4
NAT address-group(1)
InsidePort Pro