Info-Center Trapbuffer - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
Parameter
log: Log information.
trap: Trap information.
debugging: Debugging information.
boot: Time elapsing after system starts. Format: xxxxxx.yyyyyy, xxxxxx is the high 32
bits of the elapsed time (in milliseconds) after system starts, and yyyyyy is the low 32
bits.
date: Current system date and time. It shows as yyyy/mm/dd-hh:mm:ss in Chinese
environment and mm dd hh:mm:ss yyyy in Western language environment.
none: No timestamp format.
Description
Use the info-center timestamp command to configure the timestamp output format in
debugging/trap information.
Use the undo info-center timestamp command to disable the output of timestamp
field.
By default, date stamp is used.
Example
# Configure the debugging information timestamp format as boot.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center timestamp debugging boot

4.6.17 info-center trapbuffer

Syntax
info-center
channel-name } ]*
undo info-center trapbuffer [ channel | size ]
View
System view
Parameter
size: Configures the size of the trap buffer.
buffersize: Size of trap buffer (numbers of messages).
channel: Configures the channel to output information to trap buffer.
trapbuffer [ size
Huawei Technologies Proprietary
4-53
Chapter 4 System Maintenance Commands
buffersize | channel { channel-number |