Debugging Bgp - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches
Parameter
None
Description
Use the apply mpls-label command to configure the system to assign MPLS labels to
the public network routes that meet the filer condition of Route-policy.
Use the undo apply mpls-label command to cancel this configuration.
By default, the public network routes carry no labels.
Related command: if-match mpls-label.
Example
# Define an Apply clause to assign labels to routes meeting the Route-policy filter
condition.
[Quidway-route-policy] apply mpls-label

2.1.3 debugging bgp

Syntax
debugging bgp { all | event | normal | { keepalive | mp-update | open | packet |
route-refresh | update } [ receive | send ] [ verbose ] }
undo debugging bgp { all | event | normal | keepalive | mp-update | open | packet |
route-refresh | update }
View
User view
Parameter
all: Enables all types of BGP debugging.
event: Enables BGP event debugging.
normal: Enables BGP common function debugging.
keepalive: Enables BGP Keepalive packet debugging.
mp-update: Enables multi-protocol BGP Update packet debugging.
open: Enables BGP Open packet debugging.
packet: Enables BGP packet debugging.
route-refresh: Enables BGP Route-Refresh packet debugging.
update: Enables BGP Update packet debugging.
receive: Displays receive information.
send: Displays send information.
Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-3