Drop-Mode - Huawei Quidway S8500 Series Command Manual

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches
View
Any view
Parameter
traffic-index: Traffic parameter index, in the range of 0 to 173 and defaulting to 1.
Description
Use the display traffic-params command to display the parameter configuration for
traffic policing, including cir, cbs, ebs, pir, and so on.
Related command: traffic-params.
Example
# Display the parameter configuration for traffic policing.
<Quidway> display traffic-params 1
traffic parameters configuration list:
index :
--------------------------------------------------------------------------
0 :

2.1.19 drop-mode

Syntax
drop-mode { tail-drop | wred } [ wred-index ]
undo drop-mode
View
Ethernet port view
Parameter
tail-drop: Tail drop mode.
wred: WRED drop mode.
wred-index: WRED index, in the range of 0 to 3. By default, it is 0. If you type nothing for
this parameter, the system will use the parameters specified when WRED index is 0.
Description
Use the drop-mode command to configure drop mode for a port.
Use the undo drop-mode command to restore the default drop mode, i.e. tail drop
mode.
By default, tail drop mode is selected.
cir (Kbps) cbs
20000 5000
Huawei Technologies Proprietary
2-15
Chapter 2 QoS Commands
(byte) ebs (byte) pir(Kbps)
5000 30000