Display Connection - Huawei Quidway S8500 Series Command Manual

Command Manual – Security
Quidway S8500 Series Routing Switches
[Quidway] cut connection domain huawei163.net

2.1.5 display connection

Syntax
display connection [ access-type { dot1x | gcm } | domain domain-name | interface
interface-type interface-number | ip ip-address | mac mac-address | radius-scheme
radius-scheme-name | vlan vlanid | ucibindex ucib-index | user-name user-name ]
View
Any view
Parameter
access-type dot1x: Configures to display the user connections that are of the
specified access category.
dot1x: Specifies 802.1x access mode.
gcm: Specifies GCM access mode.
domain domain-name: Configures to display all the users in an ISP domain.
domain-name specifies the ISP domain name with a character string not exceeding 24
characters. The specified ISP domain shall have been created.
mac mac-address: Configures to display the supplicant whose MAC address is
mac-address. The argument mac-address is in the hexadecimal format (x-x-x).
radius-scheme radius-server-name: Configures to display the supplicant according to
RADIUS server name. radius-server-name specifies the RADIUS server name with a
character string not exceeding 32 characters.
interface interface-type interface-number: Configures to display the supplicant
according the port.
ip ip-address: Configures to display the user specified with IP address.
vlan vlanid: Configures to display the user specified with VLAN ID. Here, vlanid ranges
from 1 to 4094.
ucibindex ucib-index: Configures to display the user specified with ucib-index. Here,
ucib-index ranges from 0 to 2311.
user-name user-name: Configures to display a user specifies with user-name.
user-name is the argument specifying the username. It is a character string not
exceeding 32 characters, excluding "/", ":", "*", "?", "<" and ">". The @ character can
only be used once in one username. The pure username (the part before @, namely
the user ID) cannot exceed 24 characters.
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Huawei Technologies Proprietary
2-5
Configuration Commands