Query Active-Configuration - Huawei Quidway S8500 Series Command Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
Syntax
modify uniaddr mac-addr { aged | noaged | permanent }
View
lanswitch view
Parameter
mac-addr: MAC address of the unicast address entry to be modified.
aged: Specifies to delete the address if it is aged.
noaged: Specifies the address is not aged.
Permanent: Specifies the address can be written to the flash memory.
Description
Use the modify uniaddr command to modify the unicast address entry for an Ethernet
switch.
Related command: search uniaddr.
Example
# Modify the unicast address entry of the Ethernet switch with a position parameter of
3/1/3-/.
[Quidway-lanswitch3/1/3-/] modify uniaddr 0e0-fc11-1001 noaged
Waiting.....
Modify addr item successfully, Mac addr:00-e0-fc-11-10-01

1.3.9 query active-configuration

Syntax
query active-configuration
View
lanswitch view
Parameter
None
Description
Use the query active-configuration command to display information about the current
configuration of the Ethernet switch.
Example
Chapter 1 HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-33