Tftp Configuration Commands; Tftp Get - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
Parameter
None
Description
Use the verbose command to enable the client to display the commands received
from/sent to the server.
Use the undo verbose command to disable the client from display the commands
received from/sent to the server
By default, the VERBOSE is enabled and the client displays the commands received
from/sent to the server.
Example
# Enable VERBOSE.
<Quidway> ftp
[ftp]verbose

1.5 TFTP Configuration Commands

1.5.1 tftp get

Syntax
tftp tftp-server get source-file [ dest-file ]
View
User view
Parameter
tftp-server: IP address or hostname of the TFTP server. The name of the TFTP server
should be a string ranging from 1 to 20 characters.
source-file: Specifies the filename of the source file on the TFTP server.
dest-file: Specifies the filename of the destination file which will be saved on the switch.
Description
Use the tftp get command to download a file from the specified directory of the TFTP
server and saving it on the switch.
Related command: tftp put.
Example
# Download the file LANSwitch.app from the TFTP server at 1.1.3.214 and save it as
vxWorks.app on the local switch.
Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-41