Load Lswprogram; Query Hgmpport-Mode - Huawei Quidway S8500 Series Command Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
Example
# Enter the lanswitch view of the switch directly connected to the 1/1/6- port of the
management device.
[Quidway-hgmp] lanswitch 1/1/6-/

1.1.9 load lswprogram

Syntax
load lswprogram filename
View
HGMP view
Parameter
filename: File name of the upgrade program.
Description
Use the load lswprogram command to load the specified file saved in the flash
memory of the management device to the upgrade memory of the management device.
To execute this command, make sure the specified file is downloaded to the flash
memory of the management device through trivial file transfer protocol (TFTP) or file
transfer protocol (FTP).
Before upgrading an Ethernet switch connected to the management device, you must
use the load lswprogram command to load the file saved in the flash memory of the
management device to the upgrade memory of the management device.
Related command: upgrade lanswitch.
Example
# Load the file named switch.app and saved in the flash memory of the management
device to the upgrade memory of the management device.
[Quidway-hgmp] load lswprogram switch.app
Download Lanswitch upgrade program to RAM, Are you sure? [y/n]y
Loading program successfully!

1.1.10 query hgmpport-mode

Syntax
query hgmpport-mode
Chapter 1 HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-10