Chapter 2 Urpf Configuration Commands; Display Urpf - Huawei Quidway S8500 Series Command Manual

Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches

Chapter 2 URPF Configuration Commands

Note:
The service processor cards mentioned in this chapter refer to LSBM1NATB boards.
2.1 URPF Configuration Commands

2.1.1 display urpf

Syntax
display urpf
View
VLAN interface view
Parameter
None
Description
Use the display urpf command to query that URPF is enabled on current VLAN ports.
If URPF is enabled and the specified board with URPF function is enabled, you can
view UPRF statistical data, that is, the sum of processed packets and discarded
packets.
Example
# Query URPF enabling status and statistical data of VLAN interface 1001.
[Quidway-Vlan-interface1001] display urpf
URPF is enabled to slot 2 on current vlan interface!
packet statistics related to URPF:
Number of received packets: 5000
Number of dropped packets: 200
# Following information appears when the service processor card is not installed.
[Quidway-Vlan-interface1001] display urpf
URPF is enabled to slot 11 on current vlan interface!
Huawei Technologies Proprietary
2-1
Chapter 2 URPF Configuration Commands