Query Used Addrnum - Huawei Quidway S8500 Series Command Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
View
lanswitch view
Parameter
spec-port: Port number of the port to be queried.
index: Index for the address entry, in the range of 1 to 4,095.
shownum: Number of entries to be queried, in the range of 1 to 100. For output
information with more than 100 entries, only the first 100 entries are displayed.
Description
Use the query uniaddr port command to query the unicast address entries of a
specified port of an Ethernet switch.
Example
# Query the unicast address entries of the port 2 of the Ethernet switch with a position
parameter of 3/1/3-/.
[Quidway-lanswitch3/1/3-/] query uniaddr port 2 1 50
Waiting.....
================Result of Inquire AddrTable=======================
Index
0
=======================Some Explain===============================
1 Aged mean:0-No aged,other value- aged to delete
2 Total Number of the addrtable :
=========================End===================================
Table 1-14 Description on the fields of the query uniaddr port command
Field
Index
Mac-addr
Aged

1.3.21 query used addrnum

Syntax
query used addrnum
Mac-addr
00-e0-fc-01-10-00
Index of an address entry
Unicast MAC address
Indicates whether an address entry can be aged. The value of 0
indicates the entry is not aged. Other values indicate the address entry
can be aged. An aged address entry is removed by the system.
Huawei Technologies Proprietary
Chapter 1 HGMP V1 Configuration Commands
Aged | Index
1 | 1 00-00-00-00-00-00
1
Description
1-44
Mac-addr Aged
0