Execute - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
-rwxrwxrwx
1 -rw-
31877 KB total (2182 KB free)
The files that have already been deleted and kept in the recycle bin are displayed with
the [ ] prompt.
# Display the information about all the files (including the deleted ones) in the
flash:/test/ directory whose names start with the t character.
<Quidway> dir /all flash:/test/t*
Directory of flash:/test/
0 -rw-
7932928 bytes total (4966400 bytes free)

1.1.5 execute

Syntax
execute filename
View
System view
Parameter
filename: Name of the batch file, ranging from 1 to 256, with a suffix of ".bat".
Description
Use the execute command to execute the specified batch file.
The batch command executes the command lines in the batch file one by one. There
should be no invisible character in the batch file. If invisible characters are found, the
batch command will quit the current execution without back off operation. The batch
command does not guarantee the execution of each command, nor does it perform hot
backup itself. The forms and contents of the commands are not restricted in the batch
file.
Example
# Execute the batch file "test.bat" in the directory of "flash:/".
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] execute test.bat
1 noone nogroup
4 Apr 04 2005 20:13:47
1 noone nogroup
Huawei Technologies Proprietary
Chapter 1 File System Management Commands
971 Sep 20 2003 14:28:52
[snmpboots]
971 Sep 20 2003 14:28:52
1-4
test.txt
test.txt