Hwtacacs Configuration Commands - Huawei Quidway S8500 Series Command Manual

Command Manual – Security
Quidway S8500 Series Routing Switches

2.3 HWTACACS Configuration Commands

2.3.1 data-flow-format
Syntax
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } } | { packet
{ giga-packet | kilo-packet | mega-packet | one-packet } }
undo data-flow-format { data | packet }
View
HWTACACS view
Parameter
data: Sets data unit.
byte: Sets 'byte' as the unit of data flow.
giga-byte: Sets 'giga-byte' as the unit of data flow.
kilo-byte: Sets 'kilo-byte' as the unit of data flow.
mega-byte: Sets 'mega-byte' as the unit of data flow.
packet: Sets data packet unit.
giga-packet: Sets 'giga-packet' as the unit of packet flow.
kilo-packet: Sets 'kilo-packet' as the unit of packet flow.
mega-packet: Sets 'mega-packet' as the unit of packet flow.
one-packet: Sets 'one-packet' as the unit of packet flow.
Description
Use the data-flow-format command to configure the unit of data flow sent to TACACS
Server.
Use the undo data-flow-format command to restore the unit to the default setting.
By default, the data unit is byte and the data packet unit is one-packet.
Related command: display hwtacacs.
Example
# Set the unit of data flow sent to TACACS Server Huawei to kilo-byte and the data
packet unit to kilo-packet.
[Quidway-hwtacacs-huawei] data-flow-format data kilo-byte packet kilo-packet
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Huawei Technologies Proprietary
2-50
Configuration Commands