Display Vrrp Statistics - Huawei Quidway S8500 Series Command Manual

Command Manual – Reliability
Quidway S8500 Series Routing Switches
Auth Type
Track IF
Pri Reduced
Virtual IP
Master IP

1.1.3 display vrrp statistics

Syntax
display vrrp statistics [ vlan-interface interface-number [ virtual-router-ID ] ]
View
Any view
Parameter
vlan-interface interface-number: Specifies the name of the VLAN interface to which
the virtual router belongs.
virtual-router-ID: VRRP virtual router ID, ranging from 1 to 255.
Description
Use the display vrrp statistics command to view the information about the VRRP
statistics.
If the interface name and virtual router ID are not specified, the statistics information
about all the virtual routers on the switch will be displayed. If only the interface name is
specified, the statistics information about all the virtual routers on the interface will be
displayed. If the interface name and virtual router ID are specified, the statistics
information about the specified virtual router on the interface will be displayed.
Example
# Display the VRRP statistics information on VLAN-interface 2.
<Quidway> display vrrp statistics vlan-interface 2
Interface
VRID
CheckSum Errors
VRID Errors
IP TTL Errors
Invalid Auth Type
Field
Authentication type
Track interface
Reduced priority value for virtual router when track
interface is Down
Virtual IP address list of virtual router
IP address of the master device in virtual router
: Vlan-interface2
: 1
: 0
: 0
: 0
: 0
Huawei Technologies Proprietary
1-3
Chapter 1 VRRP Configuration Commands
Description
Version Errors
Advertisement Interval Errors
Auth Failures
Auth Type Mismatch
: 0
: 0
: 0
: 0