Auto Config - Huawei Quidway S8500 Series Command Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
Note:
To enable you to perform the same operation to multiple objects using one command
and administrate Ethernet switches by their physical positions, two types of newly
added arguments are available for HGMP configuration commands, as described as
follows:
List. An argument of this type (such as port-list, vlan-id-list and vlan-list) in a
command identifies one or multiple objects. You can input a single number for the
argument, which identifies one object. You can input a character string in such
format as 3-7, which identifies objects 3 through 7. You can also use commas to
connect single numbers and character strings. You can perform the same operation
to all objects that are identifies by the list-type argument.
For example, with a value of "3,6,10-14", the port-list parameter identifies ports
numbered 3, 6, 10, 11, 12, 13 and 14.
As the size of a system packet is limited, a list-typed argument can identify no more
than 40 objects.
Ethernet switch position parameters. It is necessary to recognize the Ethernet
switches connected to a management device. This is achieved by using arguments
of the lanswitch-loc type. An argument of this type takes the form of
slot/subslot/port-/p1/p2/, among which:
port is a port number, which identifies a port of the management device, through which
an Ethernet switch operating as a HGMP Client is connected to the management
device.
p1 is a port number, which identifies the port of the layer 1 Ethernet switch connecting
to the Ethernet switch operating as the HGMP Client.
p2 is a port number, which identifies the port of the layer 2 Ethernet switch connecting
to the Ethernet switch operating as the HGMP Client.
For example, lanswitch-loc of 3/1/3-/ identifies the layer 1 Ethernet switch connected
directly to the port 3/1/3 of the management device.
Whereas 3/1/3-/2/ identifies a Layer 2 Ethernet switch connected to port 2 of layer 1
Ethernet switch. Its root node is the port 3/1/3.
A value of 3/1/3-/2/1/ identifies a layer 3 Ethernet switch connected to port 1 of a layer 2
Ethernet switch. Its root node is the port 3/1/3.

1.1.1 auto config

Syntax
auto config default port-start-vlanid
View
lanswitch view
Chapter 1 HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-2